Banana Pi BPI M2 Ultra Quad Core A40i Allwinner Chip Development
Quad Core A40i Allwinner chip Banana Pi M2 Ultra Development board Epacket logistics is expected to be 15-30 working days,and slow update of logistics informations, If you mind ,please choose the fast logistics channel . Thank you : )Epacket logistics is expected to be 15-30 working days,and slow update of logistics
Quad Core A40i Allwinner chip Banana Pi M2 Ultra Development board
Epacket logistics is expected to be 15-30 working days,and slow update of logistics informations, If you mind ,please choose the fast logistics channel . Thank you : )Epacket logistics is expected to be 15-30 working days,and slow update of logistics informations, If you mind ,please choose the fast logistics channel . Thank you : )
PS: Now we change the chip to A40i, please kindly note that.
Banana Pi BPI-M2 Ultra is a quad-core mini single board computer built with Allwinner R40/V40 SoC. It features 2GB of RAM and 8GB eMMC. It also has onboard WiFi and BT. On the ports side, the BPI-M2 Ultra has 2 USB A 2.0 ports, 1 USB OTG port, 1 HDM1 port, 1 audio jack, a DC power port, and last but not least, a SATA port.. Also being a member of the Banana Pi family, the M2 Ultra is a direct upgrade from the Banana Pi M1/M1+ that support SATA from the SoC. The SATA performance on the R40 is fitting for media related projects such as storage servers. Backed by our community, starting a project and building servers is fun and rewarding. We welcome all companies, DIYers, and tech loving people within our community! Together, we can make a difference, we can discover our passions, inspire others, and build a practical project.
Key Features
Allwinner A40i Quad Core ARM Cortex A7 CPU
2GB DDR3 SDRAM.
8GB eMMC flahs onboard.
WiFi (AP6212) & Bth onboard.
SATA Interface.
2*USB 2.0
MIPI DSI ingerface
CSI camera interface
Hardware
Hardware interfact
Hardware spec
HardWare Specification of Banana pi BPI-M2 Ultra
Soc
Allwinner A40i
CPU
quad-core cortex -A7,the most power efficient CPU core ARM's ever development
GPU
dual-core MALI-400 MP2 and runs at 500MHz, capable of 1.1 Gpixel/s throughput. Graphics capabilities are slightly higher than the original Xbox’s level of performance. The GPU provides OpenGL ES 2.0, hardware-accelerated OpenVG, 1080p45 H.264 high-profile encode and decode.
SDRAM
2 GB DDR3 with 733MHz\(shared with GPU\)
SATA
suppoort SATA interface
GPIO
40 Pins Header, 28×GPIO, some of which can be used for specific functions including UART, I2C, SPI, PWM, I2S.
On board Network
10/100/1000Mbps Ethernet \(Realtek RTL8211E/D\)
Wifi Module
WiFi 802.11 b/g/n \(AP 6212 module on board\)
Blth
BT4.0
On board Storage
MicroSD \(TF\) card,8GB eMMC onboard
Display
4-lane MIPI DSI display,or RGB panel or LVDS panel,TV-out on HDM1 V1.4
Video
Multi-format FHD video decoding, including Mpeg1/2, Mpeg4, H.263, H.264, etc H.264 decode up to 1080P60,support video encodeing:High-deinition\(HD\)H.264 video encoder is up to 1080P@45fps
Audio outputs
HDM1, analog audio \(via 3.5 mm TRRS jack\), I2S audio \(also potentially for audio input\)
Camera
A CSI input connector Camera:Supports 8-bit YUV422 CMOS sensor interface,Supports CCIR656 protocol for NTSC and PAL,Supports 5M pixel camera sensor ,Supports video capture solution up to 1080p@30fps
Audio input
On board microphone
USB
2 USB 2.0 host, 1 USB 2.0 OTG
Buttons
Reset button, Power button, U-boot button
Leds
Power status Led and RJ45 Led
IR
onboard IR receiver
DC Power
5V/2A with micro USB port
battery
3.7V lithium battery power support
Sizes
85mmX56mm,same size as raspberry pi 3
Weight
40g
GPIO PIN define
Banana Pi BPI-M2 Berry has a 40-pin GPIO header that matches that of the Model Raspberry Pi 3. Following is the Banana Pi GPIO Pinout:
40 PIN GPIO of Banana pi BPI-R2
GPIO Pin Name
Default Function
Function2:GPIO
Function3
CON1-P01
VCC-3V3
CON1-P02
DCIN
CON1-P03
TWI2-SDA
PB21
PWM5
CON1-P04
DCIN
CON1-P05
TWI2-SCK
PB20
PWM4
CON1-P06
GND
CON1-P07
PB3
PB3
PWM1
CON1-P08
UART2-TX
PI18
SPI1\_MOSI
CON1-P09
GND
CON1-P10
UART2-RX
PI19
SPI1\_MISO
CON1-P11
UART7-TX
PI20
PWM2
CON1-P12
UART2-CTS
PI17
SPI1\_CLK
CON1-P13
UART7-RX
PI21
PWM3
CON1-P14
GND
CON1-P15
PH25
PH25
CSI1-FIELD
CON1-P16
UART2-RTS
PI16
SPI1\_CS0
CON1-P17
VCC-3V3
CON1-P18
PH26
PH26
CSI1-HSYNC
CON1-P19
SPI0\_MOSI
PC0
CON1-P20
GND
CON1-P21
SPI0\_MISO
PC1
CON1-P22
PH27
PH27
CSI1-VSYNC
CON1-P23
SPI0\_CLK
PC2
CON1-P24
SPI0\_CS
PC23
CON1-P25
GND
CON1-P26
PH24
PH24
CSI1-PCLK
CON1-P27
TWI3-SDA
PI1
CON1-P28
TWI3-SCK
PI0
CON1-P29
PH0
PH0
CSI1-D0
CON1-P30
GND
CON1-P31
PH1
PH1
CSI1-D1
CON1-P32
PD20
PD20
CSI1-MCLK
CON1-P33
PH2
PH2
CSI1-D2
CON1-P34
GND
CON1-P35
PH3
PH3
CSI1-D3
CON1-P36
UART5-RX
PH7
CSI1-D7
CON1-P37
UART4-TX
PH4
CSI1-D4
CON1-P38
UART5-TX
PH6
CSI1-D6
CON1-P39
GND
CON1-P40
UART4-RX
PH5
CSI1-D5
CSI Camera Connector specification:
The CSI Camera Connector is a 24-pin FPC connector which can connect external camera module with proper signal pin mappings. The pin definitions of the CSI interface are shown as below. This is marked on the Banana Pi board as “Camera”.
CSi Camera connector GPIO of Banana pi BPI-R2
CSI Pin Name
Default Function
Function2:GPIO
CN5-P01
NC
CN5-P02
GND
CN5-P03
CSI0-SDA
PI3
CN5-P04
CSI0-AVDD
CN5-P05
CSI0-SCK
PI2
CN5-P06
CSI0-Reset
PI7
CN5-P07
CSI0-VSYNC
PE3
CN5-P08
CSI0-PWDN
PI6
CN5-P09
CSI0-HSYNC
PE2
CN5-P10
CSI0-DVDD
CN5-P11
CSI0-DOVDD
CN5-P12
CSI0-D7
PE11
CN5-P13
CSI0-MCLK
PE1
CN5-P14
CSI0-D6
PE10
CN5-P15
GND
CN5-P16
CSI0-D5
PE9
CN5-P17
CSI0-PCLK
PE0
CN5-P18
CSI0-D4
PE8
CN5-P19
CSI0-D0
PE4
CN5-P20
CSI0-D3
PE7
CN5-P21
CSI0-D1
PE5
CN5-P22
CSI0-D2
PE6
CN5-P23
GND
CN5-P24
CSI0-AFVCC
Display specification
MIPI DSI \(Display Serial Interface\)
The display Connector is a 40-pin FPC connector which can connect external LCD panel \(MIPI DSI\) and touch screen \(I2C\) module as well. The pin definitions of this connector are shown as below. This is marked on the Banana Pi board as “DSI”.
40 PIN GPIO of Banana pi BPI-R2
DSI Pin Name
Default Function
Function2:GPIO
CN6-P01
VCC-3V3
CN6-P02
IPSOUT
CN6-P03
VCC-3V3
CN6-P04
IPSOUT
CN6-P05
GND
CN6-P06
IPSOUT
CN6-P07
GND
CN6-P08
IPSOUT
CN6-P09
NC
CN6-P10
GND
CN6-P11
NC
CN6-P12
DSI-D0N
CN6-P13
NC
CN6-P14
DSI-D0P
CN6-P15
NC
CN6-P16
GND
CN6-P17
TWI0-SDA
PB19
CN6-P18
DSI-D1N
CN6-P19
TWI0-SCK
PB18
CN6-P20
DSI-D1P
CN6-P21
CTP-INT
PI10
CN6-P22
GND
CN6-P23
CTP-RST
PI11
CN6-P24
DSI-CKN
CN6-P25
GND
CN6-P26
DSI-CKP
CN6-P27
LCD-BL-EN
PH16
CN6-P28
GND
CN6-P29
LCD-RST
PH17
CN6-P30
DSI-D2N
CN6-P31
LCD-PWR-EN
PH18
CN6-P32
DSI-D2P
CN6-P33
GND
CN6-P34
GND
CN6-P35
LCD-PWM
PB2
CN6-P36
DSI-D3N
CN6-P37
GND
CN6-P38
DSI-D3P
CN6-P39
NC
CN6-P40
GND
UART specification:
The header CON4 is the UART interface. For developers of Banana Pi, this is an easy way to get the UART console output to check the system status and log message.
CON4 Uart GPIO of Banana pi BPI-R2
CON2 Pin Name
Default Function
GPIO
CON2 P03
UART0-TXD
CON2 P02
UART0-RXD
CON2 P01
GND
Single Board Computers - IoT Store
banana pi bpi m2 ultra quad
New Raspberry Pi 4 Model B 8gb Ram, Completely Upgraded - Demo Board - AliExpress
About BPI-M2 Ultra/BPI-M2 Berry - banana pi BPI-M2 Ultra/Berry allwinner R40/V40 SBC
Banana Pi BPI M2 Ultra Quad Core A40i Allwinner chip Kuwait
Ultra Board China Trade,Buy China Direct From Ultra Board Factories at
Orange Pi Zero LTS H2 + Quad Core Open-Source 256MB - AliExpress
Banana Pi BPI-M2 Berry Allwinner A40i Quad-core Cortex -A7 CPU 1GB DDR3 With SATA BT4.0 Run Android 6.0 Ubuntu Debian Raspbian - buy Banana Pi BPI- M2 Berry Allwinner A40i Quad-core Cortex -A7
Banana Pi Open Source Hardware (@bananapi@) - Mastodon
Allwinner H3 chip Banana PI M2 plus quad core computer, Epacket logistics is expected to be 15-30 working days,and slow update of logistics
BPI M2+ BPI-M2 Plus Banana Pi M2+ board Allwinner H3 chip Quad-Core A7 SoC Custom PCB pick and place machine pcba
Orange Pi Zero 2 1GB RAM with Allwinner H616 Chip,Support BT, Wifi ,Run Android 10,Ubuntu,Debian OS Single Board - AliExpress