Bulkhead Fitting – Big Shot Supplies
Bulkhead fittings are used as a port to tanks or walls. Polypropylene Bulkhead Tank Fittings are ideal for use as inlets or outlets for valves, pipes, tanks, and totes. Each fitting consists of a body, gasket, and locking nut with wrench flats. Models with left hand threads help ease installation. Rated to a maximum pr
Bulkhead fittings are used as a port to tanks or walls. Polypropylene Bulkhead Tank Fittings are ideal for use as inlets or outlets for valves, pipes, tanks, and totes. Each fitting consists of a body, gasket, and locking nut with wrench flats. Models with left hand threads help ease installation.
Rated to a maximum pressure of 150 psi at 20°/C (70°/F), but drop to under 120 psi at -18°/C (0°F), and 80 psi at 60°/C (150°/F).
Bulkhead fittings are used as a port to tanks or walls. Polypropylene Bulkhead Tank Fittings are ideal for use as inlets or outlets for valves, pipes, tanks, and totes. Each fitting consists of a body, gasket, and locking nut with wrench flats. Models with left hand threads help ease installation. Rated to a maximum pressure of 150 psi at 20°/C (70°/F), but drop to under 120 psi at -18°/C (0°F), and 80 psi at 60°/C (150°/F).
NORWESCO STAINLESS STEEL BOLTED TANK FITTINGS, NORWESCO STAINLESS BOLTED BULKHEAD FITTINGS, BOLTED FITTINGS, THROUGH THE WALL TANK FITTING
B16 Ikelite ICS-5 Bulkhead with M16 Threads
Banjo 316 stainless steel bulkhead fittings are made from the highest quality stainless steel with double sided female NPT threads and EPDM gasket.
316 Stainless Steel Bulkhead, 3/8 in. to 3 in. Sizes
100-micron Stainless Steel Bulkhead Fuel Filter, AN-12 Male Flare – Aeromotive
BF75N Heavy Duty Bulkhead Fitting – 3/4″ (1.50″ hole size) - EasyPro Pond Products
This bulkhead fitting is suitable for connecting brass, bronze, or iron hydraulic lines through a bulkhead. The bulkhead fitting has National Pipe
Legines Brass Pipe Fitting, Bulkhead Anchor Coupling, Bulkhead Tank Fitting, Frame Nipple, 1/8 NPT Female, 1-1/2 Length (Pack of 2)
Shop online to find the best prices on a huge selection of marine watermakers, steering, helm pumps, bow thrusters, stern thrusters, stabilizers,
Seastar HF5512 Bulkhead Fitting Kit, 3/4 Max Single Cylinder
Nostalgic AC - Bulkhead Heater Hoses Only With Fittings
Tank Accessories
1 1/4 Bulkhead Replacement Kit with Plug
Accepts a wide range of projectiles for accurate and lightweight launching A vertical distance of over 100 ft. can be achieved with great accuracy
Notch Accessories Big Shot Head Large (16413)
Designed as a compact whirlpool solution for threaded kettles. Our threaded bulkhead (included in the kit) makes the addition of a 1/2 ball valve
Whirlpool | Kit for Threaded Kettle w/ Bulkhead
316 Stainless Steel Bulkhead, 3/8 in. to 3 in. Sizes
Grundéns Bulkhead Stretch Jacket
