IMPA 510766-WIRE CUP BRUSH KNOT TYPE, 75MMX5/8 — IMPA Consumables
Get IMPA 510766-WIRE CUP BRUSH KNOT TYPE, 75MMX5/8" Designed for high speed operation on pneumatic or electric scaling and sanding machines. These brushes remove rust and scale from metal, clean tanks and boat hulls, take off old paint, and clean castings and structural metal. Threaded nut type and welded shaft types are available. When ordering, please specify the type of fitting required on the cup brush and the inner diameter of the bolt fitting. __Caution__ Whenever ordering wire brushes, be certain that they will not be used on machines with speeds higher than the maximum safety speed shown for the brush..
Designed for high speed operation on pneumatic or electric scaling and sanding machines. These brushes remove rust and scale from metal, clean tanks
510766-WIRE CUP BRUSH KNOT TYPE, 75MMX5/8
IMPA 510766 - WIRE CUP BRUSH, KNOT TYPE, 75 MM x 5/8
Final List, PDF, Manufactured Goods
Wire Cup Brush Knot Type
Wire Cup Brush Knot Type
Wire Cup Brush Knot Type, 75Mmx5/8', IMPA Code:510766
Wire Cup Brush Knot Type, 75Mmx5/8', IMPA Code:510766
IMPA Code Rotary Steel Wire Cup Brushes Twisted Knotted With Nut
Tuft
Designed for high speed operation on pneumatic or electric scaling and sanding machines. These brushes remove rust and scale from metal, clean tanks
510766-WIRE CUP BRUSH KNOT TYPE, 75MMX5/8
Wire Cup Brush Knot Type
IMPA 510766 - WIRE CUP BRUSH, KNOT TYPE, 75 MM x 5/8